logo
Loading
Agilent Crosslab   Agilent Crosslab guide
    Crosslab Section Guide (PDF)
CrossLab Supplies for Bruker / Varian GC Systems
Agilent CrossLab  

CrossLab is more than supplies.

CrossLab is a growing portfolio of supplies critical to instrument performance and productivity, manufactured to perform seamlessly with a variety of analytical instruments in your lab, regardless of make or model.

Browse this collection page for Bruker / Varian instruments to find a comprehensive selection of products to use across your lab.

 

Agilent Crosslab Autosampler Syringes for Bruker / Varian GC Systems

With a broad selection of syringes for auto injection, CrossLab autosampler syringes provide what you need for accurate and effective sampling. CrossLab syringes meet all fit, form, and function criteria for specific autosampler model. Agilent delivers more value in every autosampler syringe.
• Lot number printed directly on the barrel with a corresponding Certificate of Conformance
• Illuminating backing strip, for effortless viewing of the volume scale
• Environmentally friendly packaging and improved design that reduces waste
• Individually sealed packaging for contaminant-free use right out of the box

Model Volume (µL) Description Needle Gauge/Length
(mm)/Tip		 Syringe Replacement Needle (2/pk) Replacement Plunger
CP8400
CP8410 CP9010
CP9050		 10 Fixed needle 23/50/cone tip 8010-0351    
Removable needle 23/50/bevel tip 8004-0001    
Removable needle 26/50/cone tip 8004-0003 8004-0004  
8035
8100 8200		 Fixed needle 23/50/single hole tip 8004-0002   8004-0007
Fixed needle, gas tight 23/50/single hole tip 8004-0005 8004-0006 8004-0007

Agilent Crosslab Capillary Column Ferrules for Bruker / Varian GC Systems


We offer graphite, vespel/graphite, and vespel CrossLab ferrules. The ideal ferrule provides a leak-free seal, accommodates various column outer diameters, seals with minimum torque, withstands temperature cycling, and does not stick to the column or fittings. For optimum performance, ferrules should be replaced every time the column is replaced and when performing column maintenance.
  • Graphite ferrules provide an easy-to-use stable seal, boast a high temperature limit, and can be removed easily
  • Vespel/graphite ferrules are mechanically robust and maintain a long lifetime
  • Vespel ferrules are mechanically robust, maintain a long lifetime, and can be reused or remove easily
Model Fitting Size (in.) Ferrule ID (mm) Column ID (mm) Hole Unit 85% Vespel/
15% Graphite		 Graphite Vespel

1177
1079

 1/16 0.3 0.18 or smaller 1 10/pk 8004-0211   8010-0306
1/16 0.4 0.25 1 10/pk   8010-0301 8010-0307
1/16 0.4 0.25 2 10/pk 8004-0213    
1/16 0.425 0.25 1 10/pk 8004-0212    
1/16 0.5 0.32 1 10/pk 8004-0214 8010-0302 8010-0308
1/16 0.5 0.32 2 10/pk 8004-0215 8010-0303
1177 Injector only
8004-0218

1177
1079
1061
1041

 1/16 0.8 0.53 1 10/pk 8004-0216 8010-0304 8010-0309
Model Fitting Size (in.) Ferrule ID (in.) Column ID (in.) Hole Unit 85% Vespel/
15% Graphite		 Graphite Vespel

1093
1061
1041

 1/4 1/4 1/4 1 10/pk
Straight Body
Straight Body
  
8004-0217 8010-0305

Agilent Crosslab Column Nuts for Bruker / Varian Systems

CrossLab is a growing portfolio of supplies critical to instrument performance and productivity, manufactured to perform seamlessly with a variety of analytical instruments in your lab, regardless of make or mode. Agilent now offers CrossLab Column Nuts to suit your needs.

• CrossLab column nuts to seemlessly fit with your instrument
Description Unit Part Number
Column nut, brass, 1177, 1079, 1061, or 1041 injector 2/pk 8004-0311
Column nut, stainless steel, 1093 injector 2/pk 8004-0312

Agilent CrossLab Inlet Liners for Bruker / Varian GC Systems

Liners are the centerpiece of the inlet system where sample is vaporized and mixed with the carrier gas. CrossLab GC inlet liners have the perfect mix of liner configurations and chemistries to solve your application challenges. Choose from split, splitless, PTV, and other inlet liner designs in either the new, innovative Ultra Inert deactivation or Agilent's popular original deactivation.

With part number and lot number silk screened on CrossLab liners, identification and re-ordering has never been easier.

• Perfect mix of liner configurations and chemistries to solve application challenges
• CrossLab Ultra Inert Liners offer reproducibility, robustness, and reliability
• CrossLab Ultra Inert Liners are delivered in Agilent's exclusive Touchless packaging
• Agilent original deactivation is recommended for everyday analysis

Liners for 1177 Split/Splitless Injector Ports
Description ID (mm) OD (mm) Length (mm) Volume (µL) Unit Agilent Ultra Inert Deactivation Agilent
Original Deactivation
Split/Splitless Liners
Single taper 4.0 6.3 78.5 1000 5/pk 8004-0151 8004-0101
Single taper, with wool 4.0 6.3 78.5 1000 5/pk 8004-0152 8004-0102
Double taper 4.0 6.3 78.5 1000 5/pk 8004-0155 8004-0105
Recessed gooseneck, with wool 4.0 6.3 78.5 1000 5/pk 8004-0153 8004-0103
Split Liners
Straight-through 4.0 6.3 78.5 1000 5/pk 8004-0156 8004-0106
Straight, with wool 4.0 6.3 78.5 1000 5/pk 8004-0154 8004-0104
With frit, gooseneck 4.0 6.3 78.5 1000 5/pk 8004-0158  
Direct Liners
Straight-through 1.2 6.3 78.5 90 5/pk 8004-0157 8004-0107
Liners for 1078/1079 Injector Ports
Description ID (mm) OD (mm) Length (mm) Volume (µL) Unit Agilent Ultra Inert Deactivation Agilent
Original Deactivation
Split/Splitless Liners
Single taper 3.4 5.0 54 500 5/pk 8004-0160 8004-0108
Splitless Liners
Single taper 2.0 5.0 54 170 5/pk 8004-0161 8004-0109
Split Liners
With frit (middle), gooseneck 3.4 5.0 54 500 5/pk 8004-0159  
Liners for 1093/1094 Injector Ports
Description ID (mm) OD (mm) Length (mm) Volume (µL) Unit Agilent Ultra Inert Deactivation Agilent
Original Deactivation
Direct Liners
SPI with 0.5 mm
restriction for 0.53 mm
ID on-column		 0.8 4.6 54 30 5/pk 8004-0162 8004-0110
Liners for 1075/1077 Injector Ports
Description ID (mm) OD (mm) Length (mm) Volume (µL) Unit Agilent Ultra Inert Deactivation Agilent
Original Deactivation
Split Liners
Gooseneck, with wool 4.0 6.3 72 1000 5/pk 8004-0163 8004-0111

Agilent Crosslab Liner O-rings for Bruker / Varian GC Systems

Fluoroelastomer and Graphite O-rings
CrossLab fluoroelastomer or graphite liner o-rings aid in sealing the inlet liner. Fluoroelastomer O-rings are ready for chromatographic use and feature a proprietary two-step cleaning and conditioning process which eliminates out-gassing of contaminants, a plasma-treatement for a non-stick, contaminant free surface, and a novel dial package that conveniently delivers on clean O-ring at a time.
• Liners are sealed in the inlet with Fluoroelastomer or graphite O-rings
• Graphite O-rings are used when inlet temperatures exceed 350°C
• Fluoroelastomer O-rings are easier to replace than graphite O-rings, which deform and flake apart more easily

Description Unit Part Number
Non-stick fluoroelastomer O-ring, 1177 split/splitless, 6.3/6.5 mm OD 10/pk 8004-0201
Graphite O-ring, 1177 split/splitless, 6.5 mm OD 10/pk 8004-0202
Graphite O-ring, 1177 split/splitless, 6.3 mm OD 10/pk 8004-0203
Graphite O-ring, 1078/1079 injector, 5 mm ID 10/pk 8004-0204