Skip to Store Area:

ESSLAB logo

Oxysens 120

Double click on above image to view full picture

Zoom Out
Zoom In

Oxysens 120

Manufacturer: Hamilton

£ 0.00
Cat no: 237150

Quick Overview

Oxysens 120
The OXYSENS is an electrochemical oxygen sensor which is designed for applications in water, e.g. waste water treatment, swimming pools or fish farms.


Oxysens 120
The OXYSENS is an electrochemical oxygen sensor which is designed for applications in water, e.g. waste water treatment, swimming pools or fish farms.
It is easy to maintain, because the membrane and the electrolyte don’t need to be replaced. The response time of the OXYSENS is fast, it is almost independent of flow and insensitive to soiling.
The OXYSENS sensors have been developed as 100% maintenance-free.
Manufacturer Hamilton
Technical Data >>>>>>>>>>>>>>>>>>>>>>>
Temperature SensorYes, 22 kOhm NTC
Steam SterilizableNo
Shaft MaterialStainless Steel
Serial NumberYes
Required Flow≥ 0.03 m/s
Process ConnectionPG 13.5
Pressure Range0 to 4 bar
Polarization Voltage and Time-670 ± 50 mV, < 1 hours
pH glass resistanceModerate
Oxygen ConsumptionCa. 20 ng/h in air at 25° C
Operation Temperature0 to 60°C
MembraneOptiflow
Medium Affected MaterialsStainless steel 1.4435, silicone, EPDM with FDA approval
Measuring Range40 ppb...40 ppm of dissolved oxygen
Measurement PrincipleMeasurement of the electrical current affected by the partial pressure of oxygen
ElectrolyteOXYLYTE
Electrical Connector5 m cable, open end
Diameter12 mm
CIPNo
CertificateNo
AutoclabableNo
ATEX ApprovalNo
a-length120 mm